View HIR83-01B-TR8_4449895.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 1 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai technical data sheet 1.6 0.8mm package infrared led hir83-01b/tr8 features ? peak wavelength ? p=850nm ? low forward voltage ? pb free ? the product itself will remain within rohs compliant version. descriptions ? hir83-01b/tr8 is an infrared emitting diode in miniature smd package which is molded in a black plastic with semicircle and top view lens. the device is spectrally ? matched with silicon photodiode and phototransistor. applications ? infrared applied system device selection guide chip led part no. material lens color hir83-01b/tr8 gaalas black
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 2 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai 1 cathode 2 2 1 anode hir83-01b/tr8 package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.1mm absolute maximum ratings (ta=25
) parameter symbol rating units continuous forward current i f 65 ma peak forward current *1 i fp 1.0 a reverse voltage v r 5 v operating temperature t opr -40 ~ +100
storage temperature t stg -40 ~ +100
soldering temperature *2 t sol 260
power dissipation at(or below) 25
free air temperature p d 100 mw notes: *1:i fp conditions--pulse width 100 ? s and duty 1%. *2:soldering time 5 seconds.
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 3 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai hir83-01b/tr8 electro-optical characteristics (ta=25
) parameter symbol condition min. typ. max. units radiant intensity ie i f =20ma 2.0 5.0 -- mw /sr peak wavelength ? p i f =100ma 840 850 870 nm spectral bandwidth ? i f =100ma -- 30 -- nm forward voltage v f i f =20ma -- 1.4 1.7 v reverse current i r v r =5v -- -- 10 ? a rise time tr i f =20ma -- 16 -- ns fall time tf i f =20ma -- 30 -- ns i f =20ma (x) -- 100 -- view angle 2 1/2 i f =20ma (y) -- 40 -- deg
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 4 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai 790 0 20 40 60 80 100 890 850 810 830 870 930 910 950 i f =20ma ta=25 c 75 -25 800 0 825 850 25 50 875 900 100 0 10 1 10 10 2 3 10 4 2 1 3 4 5 6 7 8 0 -40 -20 40 20 0 60 100 80 hir83-01b/tr8 typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distributio n ambient temperature fig.3 peak emission wavelength fig.4 forward current ambient temperature vs. forward voltage
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 5 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai 0.6 -20 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 20 10 0.6 -20 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 20 10 hir83-01b/tr8 typical electro-optical characteristics curves fig.5 relative radiant intensity vs. angular displacement (x axle) (y axle)
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 6 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai hir83-01b/tr8 precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30
or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30
or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 days) after opening the package. 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5
for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 7 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai hir83-01b/tr8 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 8 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai 1 cathode 2 2 1 anode 1 2 hir83-01b/tr8 package dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm 2. carrier tape dimensions:(quantity: 2000pcs/reel) note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2010-07-06 20:13:37.0 everlight electronics co., ltd. http://www.everlight.com rev 1 page: 9 of 9 device no j dir-0000353 prepared date j 0629-2010 prepared by j jaine tsai rohs pb cpn : p n hir83-01b/tr8 qty :2000 lot no : reference : cat : hue : ref : everlight made in taiwan hir83-01b/tr8 packing procedure aluminum moistue-proof bag label desiccant label label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of HIR83-01B-TR8

	To Download HIR83-01B-TR8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .